Tape Tearing Machine
Tape tearing machine
Model : RO-SJD01
It is used to realize the automatic tape tearing of photovoltaic modules, which can effectively improve the efficiency of tape tearing, reduce the labor intensity of operators, and ensure the quality of tape tearing.
Main Technical Specification
Module size: length (1700-2550) * width (1000-1450) mm
Feeding method: modules are fed in from the long side and discharged from the long side
Tact: 20s, including loading and unloading time
Glass waveform range: 0~5mm (highest point to lowest point)
Applicable edge sealing type: full edge sealing double glass module, the length of the tape head at the end ≥25mm
Module thickness: The thickness range is 4-6mm
Tape specifications: width 25-50mm; thickness 0.05-0.1mm
Waste recycling device: According to the amount of capacity, the alarm prompt after the waste is full; Drawer -type waste box, convenient for waste cleaning
Module positioning accuracy: ±1mm (excluding glass size error)
Tear edge yield: ≥98%
Utilization rate: ≥99%
Power supply: 220V, 50Hz, AC±5%, rated power 7KW
Compressed air: 0.6~0.8 Mpa, 500L/min
Overall Dimensions: 4140×2500×1700mm
Noise: 75dB