Testing Kit Charging Machine

Model : RO-GZS02

This equipment can realize the robot automatic installation tools, guide the accurate installation of the manipulator by the visual positioning system.

Main Technical Specification

Working power: AC380V 50HZ 3phase 5 line

Power: 25KW 

Working air pressure: 0.5-0.7Mpa 

Installation success rate: >99%

Tact: 20s

Applicable module type: minimum2050*950mm, maximum 2500*1400mm

Manipulator load : ≥10 kg（subject to actual on-site conditions）

Module positioning mode: CCD lens photography detection 

Camera visual range: ≥500mm*400mm

Camera Shutter mode: Electronic shutter

Camera type: area array / Line scan, HD camera

Camera accuracy: 0.2mm 

Light source type: Strip light / surface light

Weight: 1000KG 

Machine features

1, Test module Power-on testing tools applicable 60/66/72/78, conventional/half cut cell/single and double glass modules;

2, Inputting modules in place → camera photography positioning → positive and negative leads calibration, power-on fixture is positioning and grabs from the materials carts→pressing the fixture in between the long side frame.