Wire Standing, Punch Removing & Gluing Machine

Model : RO-HDZL03

It is used to remove Teflon sheet from modules, stand up wires, and apply glue to the backsheet. It integrates voltage stabilization system, servo positioning, vacuum system, human-machine interface, and manipulator module trajectory motion control.

Main Technical Specification

Tact：20s

Yield: remove Teflon sheet ≥99.8%, stand up wires ≥99.8%

Method of removing Teflon sheet  and standing up wires: Dual-axis module + vacuum mechanism + straightening mechanism + heavy-duty screw vertical double electric cylinder + pneumatic + mechanical

Spindle transmission mode: Servo motor repeat positioning accuracy ≤ 0.5mm

Overall Dimensions: Long side feeding: 3200* 1900*2070mm +200mm

Short sidef eeding:2700*1900mm*2070mm+200mm 

(hose swing arm)

Online trajectory editing: 1944P HD Glue Camera Online Editing Glue Track Dual 1944P

Glue error: <±0.5mm

Silicone brushed: deviation≤0.5mm

Glue output gram accuracy: ≤±2g

Teflon sheet type: Width>20mm, length38-45mm, thickness>0.25mm

Teflon sheet  Length and width consistency deviation requirements: One-sided deviation< 1mm